How Long Can Best Before Last

Posted on

If you are looking for the answer of how long can best before last, you’ve got the right page. We have approximately 10 FAQ regarding how long can best before last. Read it below.

sugartown publishing published titlesto order  click

1. This refers to materials that are affordable and assure

Ask: 1. This refers to materials that are affordable and assure you of better quality,
A.) Good Quality B.) Low Cost C.) Reliable D.) Suitable for the Application
2. What do you call products that are long-lasting and safe to use?
A.) Good Quality B.) Low Cost C.) Reliable D.) Suitable for the Application
3. Which one describes a material that will perform its function well and will operate safely and provide the
best it could give?p
A.) Good Quality B.) Low Cost C.) Reliable D.) Suitable form the Application
4. Take note of the exceptions so that partial payments is processed or defective products are often returned.
A.) Receiving Materials
C.) Making Receiving Reports
B.) Returning of Merchandise
D.) Making an Inventory Report of Materials
5. The person receiving the products must document that everything for every requisition were received before
any payment will be made to the supplier.
A.) Receiving Materials
C.) Making Receiving Reports
B.) Returning of Merchandise
D.) Making an Inventory Report of Materials
6. When the merchandise received is defective or not following the specifications, these are typically returned to
the supplier
A.) Receiving Materials
C.) Making Receiving Reports
B.) Returning of Merchandise
D.) Making an Inventory Report of Materials
7. What would you do if the items received were defective?
A.) You will not pay the defective items and do not return them as well.
B.) You will return the defective items to the supplier and ask for a refund.
C.) You will keep the defective items without asking for a replacement or refund.
D.) You will return the defective items to the supplier and arrange for replacement.
8. How would you justify that the material you bought is of good quality?
A.) If the material is expensive.
B.) If the material is long-lasting and safe to use.
C.) If the material is manufactured by a famous brand name.
D.) If the material is low-cost and yet suitable for the application.
9. How would you make an inventory report?
A.) Document all the materials received before giving out your payment to the vendor.
B.) Match the packing slip to the items received and ensures that the materials are destined in your
c.) Take note of any exceptions so that partial payments can be processed and defective goods can be
D.) List down all the materials received and make a report to monitor how many materials are already
10. What information would you use to support your complaint that the product you received is not the one
department.
returned.
on hand, purchased, or damaged.
you ordered?
A.) Copy of the terms regarding discount
B.) Copy of the specifications you have listed
C.) Copy of your purchase order with specifications
D.) Copy of the picture of the product you have ordered​

Answer:

1.C

2.C

3.A

4.D

5.B.

6.A.

7.C.

8.D

9.B

10.A

Sana makatulong

jay wants to propagate his fruit-bearing tree using a marcotting

Ask: jay wants to propagate his fruit-bearing tree using a marcotting method. What is the first step he needs
or air layering
A. choose the branch
B. gathering all the materials needed
C. set the cuts in the bark of a branch
9. Which is not a healthy and safety measures in propagating fruit-bearing trees?
D. apply soil/coconut dust and coconut husk
A. Wear the proper attire when planting.
B. Use commercial fertilizer instead of an organic fertilizer.
C. Read labels of pesticides and insecticides carefully before using.
D. Take care of tools and equipment to last long and maintain their efficiency.
10. What is the best soil used in seed box planting?
A. clay soil
B. sandy soil
C. loamy soil
D. chalky soil
11. Which is the best way to take care the tools and equipment to last long and maintain their efficiency?
A. Clean or wash the tools before keeping.
D. Sharp-edged tools must be placed in the
B. Keep the tools without washing to save water
garden.
C. Place the tools under the rain.
12. How important is healthy and safety measures in propagating fruit-bearing trees?
A. it can delay time
C. it prevents accidents
B. it can burden you
D. it can damage the plants
13. What is the most essential need for plant growth and survival?
D. air
C. fertilizer
A. water
b.plant
14. What type of irrigation is very expensive because the water source is under the ground?
C. drip irrigation D. sub-irrigation
B. sprinkler irrigation
A. surface irrigation
15. What will happen when cultivation is undertaken properly?
C. soil texture will improve the growth of the plants
A. the growth of weeds can be controlled
D. all of the above
B. destructive microorganism found in soil will die​

Answer:

1.d

2.a

3.c

4.b

5.d

6.c

7.c

Explanation:

sana makatulong

DIRECTION: Identify the text-type of the given paragraphs below. Choose

Ask: DIRECTION: Identify the text-type of the given paragraphs below. Choose your answer inside the box. Write the letter of the correct answer on the space provided. a. Classification b. Enumeration C. Time Order 1. Rembrandi is a famous artist known for his famous oil paintings. He was born in 1606. He knew that he wanted to be a painter by 1620, when he was in college. Rembrandt was ambitious. By 1625 he had opened his own studio. He would go on to paint many masterpieces. 2. She unpacked her suitcase her hairbrush and toothbrush her bathrobe and slippers, her jeans and shorts, dresses and blouses, socks and sneakers iPod and computer, books and papers- as if she would be staying forever in her best friend’s house. 3. Friends can be classified according to their honesty and loyalty. Honest friends tell you the truth even if it is not always what you want to hear in the long run, that honest friend may have saved you from embarrassment or possibly rejection. They give you constructive criticism overall. Loyal friends are the type of friends that will be there for you through the thick and the thin. They don’t care how good or bad you may look one day, they are sensitive to your feelings, they respect you and the other people in your life, and most of all they will never let you down when times are hard. They may be what you call a best friend. 4. I went to Tokyo Disneyland with my best friend two months ago. I visited there for the first time in a year. So I was excited from a week before. On the day, I got up early in the moming. I was fashionable. And I rode on the first train 5. Liza woke up early on Sunday. She ate her breakfast by 6 o’clock. Then hurriedly went to shower room then dressed up by 7 o’clock. Before 8 o’clock she went to the church with her family to attend the second mass. By 10 o’clock Lo and her family went home already. “To the world you are just a normal person, but to your students you are a hero”. Being a normal hero is doing good things, helping people, and making something different. The purpose of teachers is to give information and teach the students understand things. Teachers can be classified into three types Wendy teachers, funny teachers, and strict teachers. feeling with them. As a result, a friendly teacher makes the class more comfortable Fist a friendly teacher is just like a friend. You can talk to them and share Second type is a funny teacher. Everyday most students want to hear teen and teacher is the last type. The students cannot cheat during exams so everythings funny stories. Many students want to study without pressure and res. At These three types of teacher it combined together make the best teacher​

Answer:

1. A

2. B

3. A

4. C

5. B

Explanation:

HOPE CAN HELP ☺️

WRITTEN WORK NO. 3 Directions: Choose the best answer. Write

Ask: WRITTEN WORK NO. 3 Directions: Choose the best answer. Write on the space before each number.

1. Why do some people have superstitious beliefs about the moon?
A. Some people don’t believe on modern technology. B. Some people long time ago are very fascinated with moon. C. Some people has proven that moon affects their lives significantly. D. Ancient people believe that moon has a direct influence on their lives which passed on from generation to generation.

2. When the moon seems to be growing it is called
A. crescent C. waning D. waxing B. gibbous

3. The lighted part of the moon that we see on earth at different times is called
A. illuminated moon C. shapes of the moon B. phases of the moon D. structure of the moon

4. Why does the moon seem to change its shape?
A. The moon deforms its shape as it moves around the earth B. The moon breaks some its parts when it reflects light from the sun C. Only the lighted part of the moon is seen from the earth as it moves. D. All of the above

5. How many days does the moon take to complete its cycle?
A. 30 days C. 28 days B. 292 days D. 27 14 days

6. A phase where you see half of the lighted side of the moon after the new moon.
A. waxing moon C. full moon B. first quarter D. new moon

7. What moon phase is observed when the moon is between earth and the sun? A. new moon C. full moon B. first quarter D. waning crescent

8. What is observed between new moon to full moon?
A. waxing moon C. first quarter B. last quarter D. new moon

9. What phase is the moon not visible in the sky?
A. waning moon C. first quarter B. new moon D. full moon

10. What phase of the moon can you see its whole lighted side?
A. new moon
C. waning moon
B. full moon
D. waxing moon

11. What is the Earth’s natural satellite?
A. Sun C. star D. moon B. comet

12. Which of the following heavenly bodies has the strongest tide-making effect?
A. Earth C. sun B. comet D. moon

13. When the moon is completely visible at night it is called a
A. full moon C. new moon B. crescent moon D. gibbous moon

14. What are the different stages of the moon called?
A. shapes C. phases B. circles D. changes

15. Why can we see the moon?
A. Because the moon is hot C. because the moon is on fire B. Because the sun’s light shines on it D. because it makes its own light​

Answer:

1.a

2.c

3.d

4.c

5.b

6.a

7.a

8.d

9.a

10.d

11.a

12.c

13.b

14.c

15.d

EVALUATIONBelow are paragraphs with different text types Distinguish the text-type

Ask: EVALUATION
Below are paragraphs with different text types Distinguish the text-type that explains by putting a
check mark in the circle and a cross if it DOES NOT.

1. When it comes to pets, dogs are certainly the best choice. They are loyal,
affectionate and active companions. No other choice of pet can compete with a dog.
Firstly, dogs are incredibly loyal companions. They see themselves as part of the
family. Secondly, dogs are extremely affectionate animals. No other animal can show
their love when you arrive home at the end of the day quite like a dog can. Thirdly,
dogs are very active. You can always keep fit taking your dog for walk and playing
games together.

2. How would you feel if there were plastic bottles, disposed chemicals, ripped fishing
nets and other discarded containers scattered all around your house? Sadly, for a vast
majority of marine life around the world, these conditions have become a common
place, our oceans are suffering terribly. It is therefore vital that humans stop the
destruction of our precious oceans with these careless and irresponsible acts of
pollution.

3. Long, long time ago, Arrojo, a young and mighty giant, fell in love with an ordinary
mortal girl named Aloya. When this girl died, giant Arojo cried so bitterly that his tears
then turned into mounds of earth. These eventually became hills as lasting proof of his
grief, now known as, the Chocolate Hills.

4.Looking like giant mole hills, the Chocolate Hills are probably Bohol’s most famous
tourist attraction. Most people who first see the landscape in pictures can hardly
believe that these hills are natural artifact or not man-made. If this idea is true, then the
effort of building them surely surpasses the construction of the pyramids in Egypt. They
are covered with grass, which at the end of the dry season, turns into chocolate brown.
It is from this color that the name Chocolate Hills was derived.

5. If you wish to go to Chocolate Hills on your own, you can do this. From Tagbilaran,
you will have to go to the integrated bus station in Dao and catch a bus going to
Carmen. Ask the driver to drop you off at the Chocolate Hills complex which is about 4
kilometers before the town of Carmen. From there, have a 10-minute walk along a road
winding up to the complex.​

Answer:

pakiayos po yung tanong

17. Why does the moon changes its phases? A When

Ask: 17. Why does the moon changes its phases? A When the moon reflects its light from the earth B. When the moon reflects its light from the sun C When the moon reflects its light from itself D When the moon does not reflect its light 18. How long does the moon to change from one phase to another? A It takes about one week B It takes about two weeks C It takes about three weeks D It takes about one month 19. How many phases does the moon has? C Eight D. Ten A Four B Six 20. Which of the following statements describes the new moon? А The moon is visible from the earth B The moon is visible from the sun с The moon is not visible from the earth D The moon is not visible from the sun 21. Full moon occurs a week after the first quarter moon Which best describe full moon? A It appears as an entire circle in the night sky B. We see a half of the moon’s lighted part C More than half of the moon is visible D Half of the moon is illuminated 22 .Which best describes first quarter? A It occurs about a week after the new moon and before full moon B. It occurs about two weeks after the new moon and before full moon C About a week after a waning moon and before last quarter moon D About two weeks after the waxing crescent moon and before waning moon 23 .How does the last quarter occur? A It occurs on the one week of the month before the new moon will appear B It occurs on the two weeks of the month before the new moon will appear с It occurs on the three weeks of the month before the new moon will appear Dit occurs on the four weeks of the month before the new moon will appear 24 .What phases of moon does this picture show? A Crescent moon B Full moon C New moon D. Waning moon 25. Why there is changes in the phases of moon? A The position of the Earth Moon, and Sun does not change all throughout the month B The positions of the Earth Moon, and Sun vary throughout the course of the month С The amount of the moon’s surface that we can see changes a little bit every night D The amount of the moon’s surface that we can see does not change every night​

17.D

18.D

19.Eight

20.C

21.B

22.A

23.B

24.C

25.D

Which example has particles that can be drawn closer to

Ask: Which example has particles that can be drawn closer to occupy smaller volume? a. fruit juice b. block of wood c. air inside the syringe d. ice cube
2. Which of the following phenomena does NOT involve the application of gas pressure? a. burning fuels b. falling leaves c. vulcanizing tire d. rising hot air balloons
3. Last summer vacation, the Cruz family decided to go to Pagudpod, Ilocos Norte to have a beach party. On their way to Ilocos, all of them were surprised when the tire suddenly exploded. What is the probable explanation for the blown out tire during a long summer drive? a. High temperature causes a decrease in volume. b. The amount of the gases inside the tire is increased. c. The mass of the gases inside the tire increases causing a blown up tire. d. The volume of gases increases as the temperature increases, causing a blown up tire.
4. How can you possibly prove that gases have negligible mass? a. put a balloon in a digital balance before and after you fill it with air b. feel the weight of the samples on both hands c. ask two persons to hold a box filled with air d. support your claim of through equation
5. What happens to the density of a gas as its volume decreases at constant pressure and temperature? a. decreases b. increases c. stays the same d. unpredictable
For numbers 6 to 8, the choices are: a. Boyle’s Law b. Charles’ Law c. Combined Gas Law d. Ideal Gas Law
6. What law explains the mechanism of gas compressor?
7. What gas law best explains the explosion of the heated aerosol container?
8. What gas law explains the relationship among the volume, pressure, temperature, and the number of moles of gases?
9. What kind of movement is exhibited by gas molecules? a. vibrational movement b. rotational movement c. translational movement d. combination of a, b and c 10. How does the temperature affect the average kinetic energy of gas molecules? a. as the temperature decreases the average kinetic energy of gas molecules decreases b. as the temperature decreases the average kinetic energy of gas molecules increases c. as the temperature decreases the average kinetic energy of gas molecules remains the same d. as the temperature decreases the average kinetic energy of gas molecules fluctuates 15. What will happen to the gas pressure as the temperature increases, if the amount and volume of the gas are kept constant? a. the gas pressure remains the same b. the gas pressure decreases c. the gas pressure increases d. there is no significant effect

Answer:

The following are the answer per item along with the explanation:

(Please note that I rewritten the question below without the multiple choices to make it easier to read and comprehend.)

1. Which example has particles that can be drawn closer to occupy smaller volume?

Answer: C. air inside the syringe

Explanation:

The air inside the syringe although not seen can be felt. Try blocking the syringe air passage and you will be able to feel that you can not push the syringe further. This is because the air particles are already being compressed together.

2. Which of the following phenomena does NOT involve the application of gas pressure?

Answer: b. falling leaves

Explanation:

When a leaf fall there is only minimal air resistance that is acting upon the leaf. That’s why Falling leaf is an example of a freely falling object that the only force affects it is gravity.

3. …What is the probable explanation for the blown out tire during a long summer drive?

Answer:

D. The volume of gases increases as the temperature increases, causing a blown up tire.

Explanation:

This can be explained with Charle’s Law that as Temperature increases, Volume increases. The continues friction that is acted upon the tire of the car caused the rise in temperature to the tire. Also take note that the scenario illustrated is during the summer.

4. How can you possibly prove that gases have negligible mass?

Answer:

A. put a balloon in a digital balance before and after you fill it with air

Explanation:

This is the most possible way to weigh air by containing it inside the balloon.

5. What happens to the density of a gas as its volume decreases at constant pressure and temperature?

Answer:

b. increases

Explanation:

Lets take into consideration the formula of density which is ρ = mass/volume. by taking mass away from the latter an replacing it with constant k we can infer that the relationship between density and volume is inversely proportional.

_________________________

For numbers 6 to 8 choices:

a. Boyle’s Law

b. Charles’ Law

c. Combined Gas Law

d. Ideal Gas Law

_________________________

6. What law explains the mechanism of gas compressor?

Answer:

a. Boyle’s Law

Explanation:

When the gas compressor pressurizes the air inside the cylinder the volume occupied by the gasses decreases. When it decompresses the volume occupied by air increases.

7. What gas law best explains the explosion of the heated aerosol container?

Answer:

c. Combined Gas Law

8. What gas law explains the relationship among the volume, pressure, temperature, and the number of moles of gases?

Answer:

d. Ideal Gas Law

_________________________

9. What kind of movement is exhibited by gas molecules?

Answer:

d. combination of a, b and c

Explanation:

Gas particle are freely moving object. It is one property of gas particles to flow in whatever direction or position it is directed.

10. How does the temperature affect the average kinetic energy of gas molecules?

Answer:

a. as the temperature decreases the average kinetic energy of gas molecules decreases

Explanation:

The friction between molecules causes the gasses to heat up thus the increase in heat.

15. What will happen to the gas pressure as the temperature increases, if the amount and volume of the gas are kept constant?

Answer:

b. the gas pressure decreases

Explanation:

This is explained in Gay- Lusaac’s law that at constant volume, Pressure decreases as Temperature increases.

The above questions are mostly about Ideal Gas Laws. To know more about Ideal Gas Laws. You may read on the related links below:

Definition: https://brainly.ph/question/2081255

Applications: https://brainly.ph/question/2117053

Value of R: https://brainly.ph/question/1413062

__

Please mark brainliest or thanks if it helped! 🙂

#LearnWithBrainly

1. It is used to apply lubricating oil into the

Ask: 1. It is used to apply lubricating oil into the joints of garden tools like pruners, Shears.

a. wire brush
b. whetstone
c. fine steel wool
d. old toothbrush

2. This tool is the best way to stabilize the blade of a hand tool in performing any activity in horticulture.

a. whetstone
b. lubricating oil
c. fine steel wool
d. bench vise

3. This is used in hand tool when cleaning accumulated rust and dirt of all metal surfaces.

a. fine steel wool
b. whetstone
c. medium grit-sand paper
d. wire brush

4. Hand tools are usually light and used in performing farm activities without the help of animals or machines. Which of the following is an example of tools in cleaning the land?

a. hand trowel
b. crowbar
c. axe
d. light hoe

5. Which tool does not belong to the group?

a. spading fork
b. shovel
c. spade
d. bolo

6. When sharpening the blade of a tool with a file, do not use oil. What will happen if oil is used in filing?

a. it will prevent the formation of rust it stabilize the blades against the solid surface
b. it has a nice sharp blade
c.it stabilize the blades against the solid surface
d. metal filings will accumulate and clog the file’s serration

7. Farm tools, implements, and equipment are used in horticultural operations, which of the following does the farm tool pruners belong?

a. tools for clearing the land and separating the grass
b. tools for transporting and loading garden materials
c. tools for cultivating the soil, digging and pulverizing the soil
d. tools for cutting and harvesting

8. Even if one may have the most sophisticated tools and implements but does not know how to use them, they are useless. In order to do horticultural operations successfully, which of the following is the best requirement to a farmer?

a. a farmer should know how to keep farm tools after using it
b. a farmer should know how to what are the correct working clothes
c. a farmer should have a good working knowledge of the tools, implements and equipment before using them
d. all of the above

9. In cleaning the blade of a tool, what is the main reason of applying lubricant oil?

a. this will extend the life of the tool and require less effort to use
b. it will cut the soil better and the edge become sharper
c. it will keep the tool from functioning properly
d. it will easily remove any pitting that has formed and to prevent the formation of rust when not in use

10. Imagine that the long, summer vacation has finally come to an end and it’s the beginning of the school year and you are ready to start working your vegetable gardens, but when you start pulling out all of your tools you see that they are covered with rusts and dirt that has hardened and crusty globs of oil that have collected dust last vacation. What will you do first before working your garden?

a. armed with working clothes and personal protective equipment
b. proceed to the shop to retrieve your tools so that you can start clearing away the last remnants of summer
c. clean accumulated rust and dirt of all metal surfaces with paint
d. conduct pre-operative check-up of farm tools, implements and equipment before using it​

Answer:

1.A

2.D.

3.D.

4.D.

5.D.

6.A

7.B.

8.D.

9.A.

10.C

BRAINLIEST pls

1. It is used to apply lubricating oil into the

Ask: 1. It is used to apply lubricating oil into the joints of garden tools like pruners, Shears.

a. wire brush
b. whetstone
c. fine steel wool
d. old toothbrush

2. This tool is the best way to stabilize the blade of a hand tool in performing any activity in horticulture.

a. whetstone
b. lubricating oil
c. fine steel wool
d. bench vise

3. This is used in hand tool when cleaning accumulated rust and dirt of all metal surfaces.

a. fine steel wool
b. whetstone
c. medium grit-sand paper
d. wire brush

4. Hand tools are usually light and used in performing farm activities without the help of animals or machines. Which of the following is an example of tools in cleaning the land?

a. hand trowel
b. crowbar
c. axe
d. light hoe

5. Which tool does not belong to the group?

a. spading fork b. shovel c. spade d. bolo

6. When sharpening the blade of a tool with a file, do not use oil. What will happen if oil is used in filing?

a. it will prevent the formation of rust it stabilize the blades against the solid surface
b. it has a nice sharp blade
c.it stabilize the blades against the solid surface
d. metal filings will accumulate and clog the file’s serration

7. Farm tools, implements, and equipment are used in horticultural operations, which of the following does the farm tool pruners belong?

a. tools for clearing the land and separating the grass
b. tools for transporting and loading garden materials
c. tools for cultivating the soil, digging and pulverizing the soil
d. tools for cutting and harvesting

8. Even if one may have the most sophisticated tools and implements but does not know how to use them, they are useless. In order to do horticultural operations successfully, which of the following is the best requirement to a farmer?

a. a farmer should know how to keep farm tools after using it
b. a farmer should know how to what are the correct working clothes
c. a farmer should have a good working knowledge of the tools, implements and equipment before using them
d. all of the above

9. In cleaning the blade of a tool, what is the main reason of applying lubricant oil?

a. this will extend the life of the tool and require less effort to use
b. it will cut the soil better and the edge become sharper
c. it will keep the tool from functioning properly
d. it will easily remove any pitting that has formed and to prevent the formation of rust when not in use

10. Imagine that the long, summer vacation has finally come to an end and it’s the beginning of the school year and you are ready to start working your vegetable gardens, but when you start pulling out all of your tools you see that they are covered with rusts and dirt that has hardened and crusty globs of oil that have collected dust last vacation. What will you do first before working your garden?

a. armed with working clothes and personal protective equipment
b. proceed to the shop to retrieve your tools so that you can start clearing away the last remnants of summer
c. clean accumulated rust and dirt of all metal surfaces with paint
d. conduct pre-operative check-up of farm tools, implements and equipment before using it​

Answer:

1.B

2.A

3.D

4.D

5.D

6.D

7.D

8.C

9.C

10.C

C. Read and understand the items below. Encircle the letter

Ask: C. Read and understand the items below. Encircle the letter of the correct answer. 1. Which of the following is a method of plant propagation? A. budding B. marcotting or air layering C. grafting D. all of the above 2. In this method of propagating trees, a scion is inserted into the rootstock to unite and grow as one, A. budding B. grafting C. stratification D. marcotting or air layering 3. The following sentences are the benefits of budding except one, what is it? A. tree produces good fruit B. increase farm production C. you need to wait for the roots to appear D. be able to produce good trees in your own time 4. It is a process by which a new plant is grown by inserting a scion into the stock so that they will form a union and grow together. A. budding B. grafting C. cutting D. marcotting or air layering 5. Jay wants to propagate his fruit-bearing tree using a marcotting method. What is the first step he needs to do? A. choose the branch B. gathering all the materials needed C. set the cuts in the bark of a branch D. apply soil/coconut dust and coconut husk 6. Which is not a healthy and safety measures in propagating fruit-bearing trees? A. Wear the proper attire when planting. B. Use commercial fertilizer instead of an organic fertilizer. C. Read labels of pesticides and insecticides carefully before using. D. Take care of tools and equipment to last long and maintain their efficiency. 7. What is the best soil used in seed box planting? A. clay soil B. sandy soil C. loamy soil D. chalky soil 8. Which is the best way to take care the tools and equipment to last long and maintain their efficiency? B. Keep the tools without washing to save water A. Clean or wash the tools before keeping. C. Place the tools under the rain. D. Sharp-edged tools must be placed in the garden. 9.How important is healthy and safety measures in propagating fruit-bearing trees? B. it can burden you A. it can delay time 10. It is used for cutting small branches including the unnecessary branches. D. knives C. it prevents accidents D. it can damage the plants A. bolo B. shovel C. prunning shears​

Answer:

A.

C.

B.

D.

D.

A.

B.

C.

A.

A.

Explanation:

Brainliest mo ako.

Not only you can get the answer of how long can best before last, you could also find the answers of Which example has, 1. It is, 1. It is, 17. Why does, and DIRECTION: Identify the.